Featuring Hand Picked Aviation Movies and Videos for Aeromodelers — Reviewed and Recommended by our Members and Friends.
This is a brand new segment on our KC Free Flight Website. As time allows and we get additional responses from our members and visitors there will be more awesome videos to share. In the mean time, enjoy these as a sampling of things to come.
If you have a comment or question about one of the videos above, leave a comment in the LEAVE A REPLY box at the very bottom of this page.
If you have a video you would like to share with our community, please use our Contact Form for Members’ Movies and Video Picks See below for more information.
Gollywock Sunrise Flight at Wawa 8.1.20 – Heaven on Earth
Submitted by HAFFA Member Jeff Renz — 8/29/2020
No further explanation is necessary for this one—just watch and enjoy the joys of Free Flight!
B-24 Liberator Willow Run Assembly Plant
Submitted by HAFFA Member Jack Vetter — 8/29/2020
B-24, also called Liberator, long-range heavy bomber used during World War II by the U.S. and British air forces. It was designed by the Consolidated Aircraft Company (later Consolidated-Vultee) in response to a January 1939 U.S. Army Air Force (USAAF) requirement for a four-engined heavy bomber.
This video tells the fascinating story of how this plant, dedicated just 6 months before World War II, became able to produce a Liberator every 55 minutes for the war effort. A must watch for history buffs.
Winding A Rubber-Powered Twin – Start To Finish
Submitted By Roie Black — 9/9/2020
Shown at left is Tom Hallman’s 37″ MiG-DIS rubber powered free-flight model.
A few had asked, so I filmed the process of winding my 37″ rubber-powered MiG-DIS twin. Shows the use of a twin stooge, blast tubes and a 10:1 Rees winder. 1600 turns which gives her 85-90 seconds of power. She then goes up for a long ride on a perfectly warm & calm day in Wawayanda, NY. 10.6.16 Music: “Through the Dark” by Helen Jane Long.
How to Convert a Guillows Model Plane to Radio Control Flight
Submitted by Paul Morgenroth, III and Suman Saripalli — 8/30/2020
Admittedly the photo at left of the video is a bit cheesy—however if you have ever wanted to get a basic idea of converting a stick and tissue model airplane to electric radio control—here is the place to start.
If you liked the video at left you will like this one as well: Guillow’s SE5A RC Conversion Build and Flight.
Suman Saripalli and I have been doing this for a number of years now and are now part of a growing number of people taking older models that have “Good Bones” and restoring them by taking the sometimes tattered tissue off, adding our own coverings and completing the project by adding electronics.
This is made more possible in the last 5 years because of an explosion of electronic components for drones and the reduction of the weight of larger storage capacity batteries. Our planes, when completed, fly a little slower than their drone cousins, but in this rushed and sometimes crazy world, its not a bad trait at all to have. Take our word for it—they are certainly worth the time and effort it takes to make the conversion. Keep in mind that Electric Assist Model Airplanes by their nature have longer flight times—sometimes over an hour! You also have control of them it in the air, and lastly don’t forget that you can land them literally at your feet! What an AWESOME combination! Also the fact that there are better receivers and transmitters with lower prices available now, it is easier than ever to get into RC!
Each plane is different so sometimes it’s hard to explain just how to go about the process and know what what is right for each case. This video gives the basics and gives enough detail to make your time worth watching. And yes, he is a bit more serious than the graphic at left would suggest. The video is certainly great for the audience it was intended for.
See also our own transformation of an “Old-timer” converted to Electric Assist by going to Restoring and Converting an Old-Timer Model Airplane to RC Electric Assist on this website. If you have questions about this video or our conversion of the Altimeter-Hybrid leave Suman and I your question or comment in the LEAVE A REPLY at the bottom of this page. Thanks.
Submitted by Jeff Nisley — 9/1/2020
If you liked part 1, take time out of your busy day to complete the saga.
You won’t be sorry you did. Thanks for watching.
NoCal test flight – Turbo Cessna 195
Submitted by HAFFA Member Jerry White — 8/29/2020
Gerorge Bredehoft, owner of the website Volare Products, writes: My first attempt at a serious indoor NoCal. Hoping to exceed 3 minutes. This weighs 6 grams and was about the 3rd flight attempt. Here is a link to this Turbo Cessna 195 Laser Cut NoCal SHORT KIT.
Jerry White writes: Here is a video of a NoCal or “No Calorie” indoor model that was my first attempt to build an indoor model airplane. Graceful in its flight, it goes on to make a nice landing. It’s a must see for NoCal enthusiasts.
Submitted by HAFFA MEMBER Dennis Baker — 8/29/2020
As I am just back from Motorized Paragliding Lessons a few weeks ago, I’m excited to get started in this fascinating hobby and to actually participate in my own rig!
Nieuport 11 Bébé
Submitted by HAFFA MEMBER Jeff Nisley — 8/28/2020
I’m actually building a model of this awesome biplane of the WWI area, but sadly to say, it has taken a back seat for a while…
The Nieuport 11 was a French biplane fighter of World War 1, credited with significantly combating the Fokker Scourge of late summer 1915 to early spring of 1916. Quickly supplanted by the Nieuport 17, it was nonetheless a successful and important fighter that served to expand and intensify the air war over the Western Front..
1936 Model Aircraft National Championship
Submitted by the KC Free Flight management team as the first video featured on this page — 8/24/2020.
Here’s an interesting look at a free flight model aircraft contest in 1936 boasting “300 model airplane builders from all parts of the United States, Canada, France and England”.
If you have a comment or question about one of the videos above, or if you have a video you would like to share with our community, leave a comment in the LEAVE A REPLY box below. You can also leave a URL of the video in your request to have the video featured on this page. Here is a great definition of what URL means.
CONTACT FORM for Members’ Movies and Video Picks
Your name, Email address, and Message is required so we can get back to you. If you are recommending a video, please copy and past the URL in the Message box so it can be reviewed. If it passes our “GOOD TO GO” test for our “Aeromodeler” visitors—it will be added to this page with a”submitted by” notation with your name. If you prefer not to have the “submitted by” notation, note that in your comment. Also if you have a comment on the video you are submitting, put the comment in quotes and indicate that you want that copy to accompany the video. Your information will not be shared. Thanks — The KC Free Flight Team
If you just want to leave a comment or have a question, please use the LEAVE A REPLY box below.